Aesthetic Physiotherapy - AUTOMATIC VITALTERM
Contact us |
The high quality of the appliances of AUTOMATIC VITALTERM guarantees
a preferential treatment to the safety of the client and, therefore,
to the safety of the therapist. For this reason, the appliance incorporates
an innovative safety system that allows the operator to give a part
of the control of the machine to the client.
This granting of authority is unlimited, since the client only
has capacity of acting in front of the fact of sending the signal
of functioning or of stoppage, but it is useful in any case since
the client receives a feedback from the machine that responds to
their sensory needs.
The appliance has been equipped with a dispositive that obeys a
safety control. This control allows the client to make the current
pass during the session without any type of danger or detaining
the appliance immediately in the moment in which the client feels
an uncomfortable or unknown sensation.
When the client presses the safety handle, the current is put into
movement and penetrates in the circuit between the active and passive
plates. This is visualized on the machine through the illumination
of the green pilot at the front of the appliance. When the client
releases the safety handle, the current is stopped and the treatment
is stopped instantly. The stopping of the passage of the current
is visualized at the front of the appliance through the turning
off of the green pilot.
It is important that the therapist always gives the safety control
to the client at all times when you connect the plates. In the first
place, because the client has a direct sensitive perception of the
passage of the current that can modify. In second place, because
the possibility that the client falls asleep and loses consciousness
of the therapy is reduced (this situation is often produced, due
to the nature of the extremely pleasant sensation of the therapy
and by causing an important muscular relaxation).
|
